Main Feature
English
TOMINE’s AZ series Pulp Pump is a successful design based on long-term technology accumulation and on the experience of domestic and overseas advanced technology. The pump has a strong capacity to convey fiber, particles, the pulp below 8% density and other liquid with the solid content below 30%. It can be used in SUCH operating environments LIKE paper making, metallurgy, fertilizers, salt collecting, drainage and power plant,
TOMINE’s AZ series Pulp Pump is a successful design based on long-term technology accumulation and on the experience of domestic and overseas advanced technology. The pump has a strong capacity to convey fiber, particles, the pulp below 8% density and other liquid with the solid content below 30%. It can be used in SUCH operating environments LIKE paper making, metallurgy, fertilizers, salt collecting, drainage and power plant
The follow information must be provided for engineering desigin of the pump system
| Operating conditions | Pumped fluid | |||
| Capacity m3/h | Max Rated Min | 1 Media ______________ | Max ratio Min ratio % | |
| Total head m | Max Rated Min | 2 Media ______________ | Max ratio Min ratio % | |
| Suction pressure MPa | Max Rated Min | 3 Media ______________ | Max ratio Min ratio % | |
| Discharge pressure MPa | Max Rated Min | Content (humidity) wt % | ||
| NPSH required m | Particle diameter mm | |||
| Operating conditions | Continuous Intermittent | Medium characteristics | Corrosion Abrasion | |
| Spot conditions | Operation temp °C | Max Normal Min | ||
| Position | Density | Under operating temp kg/m3 | ||
| Indoor | With heating | With shield | ||
| Viscosity | Under operating temp mPa.s | |||
| Outdoor | Without heating | Without shield | Under operating temp MPa(A) | |
| Requirement of Cold-proof | Specific heat | |||
| Requirement of Damp-heat-proof | Concentration of chloride | PPM | ||
| Site condition | H2S Density | PPM | ||
| Concentration of H2S | ||||
| Altitude | Flammable Explosive Toxic | |||
| Atmosphere pressure | Volatile characteristics | Easy Not easy | ||
| Max Min % | Boiling point | |||
| Ambient temp. Range | Crystallization temp | |||
| Abnormal conditions | Dust Smoking | Smelting point | ||
| Electrical classification | Class Division Group | Point of flammability | ||
| Power source | Volt Hz Phase | |||
| Slurry Condition | Temp °C Pressure MPa | |||
| Chloride concentration PPM | ||||
| Critical pressure | MPa | |||
| Compressed air of instrument | Max / Min. Pressure /MPa | |||
| Other | ||||
| Coupling type | ||||
