HomeTOMINE MineralFlotation Equipments

BS-K Air Flotation Machine

Brief Introduction
When BS-K flotation machine works, slurry is inhaled from the bottom of the cell to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole cell.

Contact Download
Main Feature

Advantages and Characteristics

  • 1.Mainshaft is hanging on the machine frame, light structure and easy installation
  • 2.Impelleris cone shape; stator is radial, strong agitation and lower power consumption
  • 3.U shape tank is made and lower sandsettlement
  • 4.Thediameter of the impeller is smaller thus lower peripheral speed
  • 5.Lower power consumption and saving 30-50%energy
  • 6.Wellfloated particles and higher recovery
  • 7.Lightwearing of the spare parts so longer service life of them
Technical Specification
 Main Technical Parameters
 

Model

Effective volume(m3) Capacity (m3) Diameter of impeller(mm) Impeller rotation(r.p.m) Pressure of blower(Kpa) Maximum air inhalation (m3/m2.min) Power of impeller(Kw)  Power of scrapper (Kw) Weight of each cell (Kg)
BS-K2.2 2.2 0.5-3 420 260 ≥ 15 2~3 5.5 0.75 1750
BS-K4 4 0.5-4 500 220,230 ≥ 17 3~6 7.5 0.75 2568
BS-K6 6 1.0-6 650 197 ≥ 27 15  

 

 

1.1

3570
BS-K8 8 1.0-8 650 180,190 ≥ 21 15 4539
BS-K16 16 2.0-15 750 160,170 ≥ 27 6~ 15 30 8131
BS-K24 24 7.0-20 830 154,159 ≥ 29 8~ 18 37 9546
BS-K38 38 10.0-30 910 141 ≥ 34 10 ~ 20 45 11107