Cone crushers are divided into hydraulic cone crushers, composite Hydraulic&Spring type  Cone crushers and Spring Type  Cone crushers, their wearing parts are collectively called cone crusher Spares. The structure of the cone crusher is mainly  composed of horizontal shaft, moving cone, balance wheel, eccentric sleeve, upper rolling wall (fixed cone liner), lower crushing wall (moving cone liner), hydraulic coupling, Lubrication system, hydraulic system, control system and other parts, among which the broken wall and the wall of the mortar are the more common accessories.

Material:
Manganese 13 Chromium 2 (Mn13Cr2)
The Mn13Cr2 material is used, that is, while reducing the content of C and Mn in traditional high steel, Cr is added to make up for the lack of toughness of traditional high manganese steel, and effectively prolong the service life of accessories.

Manganese 18 Chromium 2 (Mn18Cr2)
The material is Mn18Cr2, which has undergone compound modification treatment to refine the grain and purify the grain boundary; the solidification mode is controlled during casting, and the heat treatment process is optimized. The casting has high hardness, good toughness and impact resistance, and is suitable for the work of large and medium-sized cone crushers.

TOMINE produces spare parts for the following types of cone crushers:

HP100, HP200, HP300, HP400, HP500, HP800, HP3, HP4, HP5, HP6, HP7, HP8;
GP11F,GP11M,GP100,GP200,GP300,GP550;
GP100S, GP200S, GP300S, GP500S

manufactures various spare parts for the following cone crusher types
CH420, QH330, CH430, CH440, CH660, CH870, CH880;
CS420, CS430, CS440, CS660;
H2800, H3800, H4800, H6800, H7800, H8800;
H2000, H3000, H4000, H8000;
S2800,S3800,S4800,S6800;
S2000,S3000,S4000,S6000.