HomeEquipment & Accessaries

NZJV Vertical Suction Slurry Pump

TOMINE'S NZJV Vertical Double-suction Slurry Pump is a submersible slurry pump that is usually installed into a pool or a pit near to ball mill and tank

Spiral Conveying Feeder

Screw conveying feeder is _ kind widely use in conveying equipment, mainly used for horizontal or inclined (slope Angle is not more than 20 °) conveying powder, granulated and small lump materials, such as coal powder, carbon black, soda ash, renewable rubber powder, zinc oxide, calcium carbonate and small lump coal and so on

TPK Chute Feeder

TOMINE Trough Type feeder is suitable for materials with medium size of broken shoulders. The maximum grain size should not exceed 150mm, and the fuselage should be placed downwards at an angle of 5~6 degrees.

GZG Vibrating Feeder

TOMINE GZG series synchronous inertial vibrating feeder transits lump and grain materials to the receiver evenly and continually or quantitatively, which can protect the receiver from being damaged by materials It can feed the crusher continually and evenly so to improve crushe capacity and keep it running continuously.

Apron Feeder

TOPMINE Apron feeder is generally used under the large-scale hopper, transporting the material of large volume to a variety of crushing devices in a uniform and continuous way at a short distance.Besides, it is widely used in various fields such as mining, smelting, building materials, highway, railway, water conservancy and chemical industry.Apron feeder is a kind of bulk material conveying equipment, changing the batch-type feeding into continuity feeding

Vibrating Feeder

TOMINE feeder is linear vibrating type .its vibration exciter could ensure stable vibration, reliable running and long service life time. In this way, the feeder could continuously feed crusher at an even speed

SF Flotation Machine

SF Flotation Machine is one major flotation equipments in mineral processing plant of Copper, Tin, gold ore, When the impeller is revolving, the pulp in the impeller cavity can be swing out at the centrifugal force

JJF Flotation Machine

JJF Flotation Machine is revolving, there is vortex in the column and nozzle. The negative pressure in the vortex inhales air to the air inlet pipe to mix with the pulp inhaled from the section of impeller and stator through the nozzle.

BS-K Air Flotation Machine

When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mix with air

BF Flotation Machine

BF series flotation machine has I type and II type. I type is referred and designed by SF flotation machine and II type is referred and designed by JJF flotation machine. I type is sucked cell and II type is direct cell and normally called as BF series.

XCF/KYF Flotation Machine

After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole cell. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mix with air. The remained slurry flows to the next cell until becomes tailing.

XJK Flotation Machine

XJK Flotation Machine works with motor drives belt pulleys to make the impeller moving by triangle belt. One is to mix the air and pulp sufficient, the other side is to agitate the pulp with chemical reagents as well as thinning the bubbles