HomeTOMINE MineralExploration Geo Drilling Rig

Exploration Drilling Rig X

WRIKU@TX-1TD-L Crawler type rig is common to have issues such as shallow hole, short distance between holes and high frequency of relocation during the drilling projects. Dismantling manually and relocating it not only intensify the labor works but increasing the time taken for the drilling therefore reducing the construction efficiency. To solve these problems, we designed a drilling rig suitable in construction projects which require frequent and fast mobility. It is applicable in various geological survey projects and geological exploration at the shallow core for the construction of railways, highways, bridge tunnels, foundation for dam of the hydropower stations, industrial and civil buildings, national defense construction and so on. The drilling depth is 30-100m.

Contact Download
Main Feature
Basic parameters Drilling depth 30~100m
Drilling diameter Φ150~Φ75mm
Diameter of drilling pipe Depends on the choices on drilling hole
Power head 1st gear 2nd gear 3rd gear 4th gear
Rotational speed output (clockwise) 90r/min 191r/min 360r/min 600r/min
Rated maximum torque output 1000N.m
Up down feeding stroke of the power head 450mm
Winch Main hoist
Lifting ability (Single rope 1st layer) 14.7KN
Maximum lifting speed of single rope 2.08m/min
Steel rope specification 11mm
Capacity for the steel rope 25m
Power Electric motor Model Y160M-4
Power 11KW
Rotational speed 1460r/min

Features&Characteristic

1.Allow hydraulic retraction to clear the drilling hole area to lift or lower the drilling tools as well as equipping it with manual chuck based on customer needs.

2.The hydraulic chuck allows continuous drilling without loosening the chuck and position the drilling pipe at a higher place. Thus, reducing the labor intensity.

3.High engine power with 90-600 r/min rotational speed. Besides, it is available in 4 gears, large torque and applicable in various site.

4. Fully equipped with drilling rig set including vibrator, A-shaped tower, mud pump and various drilling tool for customer needs.

Technical Specification
Basic parameters Drilling depth 30~100m
Drilling diameter Φ150~Φ75mm
Diameter of drilling pipe Depends on the choices on drilling hole
Power head 1st gear 2nd gear 3rd gear 4th gear
Rotational speed output (clockwise) 90r/min 191r/min 360r/min 600r/min
Rated maximum torque output 1000N.m
Up down feeding stroke of the power head 450mm
Winch Main hoist
Lifting ability (Single rope 1st layer) 14.7KN
Maximum lifting speed of single rope 2.08m/min
Steel rope specification 11mm
Capacity for the steel rope 25m
Power Electric motor Model Y160M-4
Power 11KW
Rotational speed 1460r/min
Solution
Industry Application