TOMINE’S FGD Pump features with unique design allowing long-term running of the mechanical seal without cooling water;its structure conveniences pipeline arrangement; it can couple intelligent monitoring system, and either automatic control or incorporating with DCS is possible. It is suitable to convey slurry or produced from flue gas desulphurization process, or corrosive liquid containing hard
FDG Pump
TOMINE’s FDG series is a circulating pump which designed by our company according to the need of the desulphurization industry.
With two-phase flow hydraulic design in conformity with ISO5199 standard, the wetted parts are made of alloy with strong resistance to abrasion and corrosion. It can use both dynamic seal and mechanical seal; the unique design allows long-term running of the mechanical seal without cooling water;its structure conveniences pipeline arrangement; it can couple intelligent monitoring system, and either automatic control or incorporating with DCS is possible. It is suitable to convey slurry or produced from flue gas desulphurization process, or corrosive liquid containing hard
Application:
﹒ Soda and inorganic salts: lime milk, carbide slag, and salt mud.
﹒ Metallurgy: ore slurry for zinc,aluminium, copper, vanadium production.
﹒ Petrochemical industry: sand-bearing crude oil.
﹒ Paper-making industry: lime milk.
﹒ Fermentation industry: various fermenting liquid.
﹒ Environmental protection in power plant: coal ash, gypsum slurry.
TOMINE’s FDG Pump for fuel Gas Desulpharizartion is a centrifugal pump of horizontal, axial end suction and radial discharge design.The pump cover is fixed on the frame and is clamped tightly by pump casing and frame. When do maintenance,disassemble the connecting nut between the frame and the pump casing. the pump’s driving part can be pulled out of pump casing without disassembling the pipeline of suction and discharge.For large pumps,there is a connector between pump coupling and the motor shaft. When do maintenance, it dosn’t need to remove the motor apart from the Pump but just remove the connector’s the driving part wichcan be pulled out of the pump casing .This is a universal structure of chemical process pump
Capacity:(2 ~ 14000)m3/h ;
Total head:(8 ~ 100)m;
Working temperature:(- 20 ~ 180)℃ ;
Max working pressure:1.6MPa;
Conform to IS02858 、IS05199 Standard API610 OH1