HomeTOMINE MineralSlurry Pump Equipments

NZJF Series Froth Slurry Pump

NZJF foam slurry pump or froth slurry pump is mainly applied to transport foam slurry. During this process, it can partly remove foams. The transportation capacity of the rubber-lined slurry pumps is much higher than that of other models. Besides, it does not need a shaft seal or seal water. Due to this, our froth slurry pump has become the ideal pump for many concentrating mills and other industrial uses. Naipu NZJF series slurry pumps are equivalent to Warman F series pumps.

Contact Download
Main Feature

Advantages of Foam Slurry Pump

  • Rubber lined slurry pump is characterized by high efficiency, unique anti-wear design, convenient maintenance and repair.
  • Foam slurry pump makes use of multistage tandem to ensure long-distance transportation.
  • The adoption of high wearproof rubber can lengthen the service life of wetted parts. For example, rubber front plate and impeller can be used respectively for 205 days and 120 days. The rubber has chemical stability, light weight and high resilience. It can reduce noise and vibration.
  • TOMINE is able to develop and manufacture products like foam slurry pump. The company sets up close relationship with Eastern China University of Science and Technology, Nanchang and Changsha Metallurgy Design and Research Institute, and so on.
  • Rubber lined slurry pump employs many designs, such as flow cross section design, uniform section velocity design, optimized parts structure design, etc. Besides, EDEM discrete finite element analysis software is utilized in the design.
  • The wearing parts of foam slurry pump are well designed so as to reduce abrasion.
  • Rubber lined slurry pump has good performance which is suitable for different requirements of working conditions.
  • Operators and quality inspectors make several quality tests to guarantee pump quality.
  • The company also provides foam slurry pump selection service.
Technical Specification

Parameters of Design Duty Points of NZJF Series Froth Slurry Pump

Design duty points refer to the rated point designated at the beginning of design of a slurry pump which is usually the highest efficiency point. Working range is increased by adjusting the speed of an NZJF froth slurry pump practically.

Model FLOWRATE Q(m3/h) HEAD H(m) SPEED n(r/min) Drive Arrangement Blades
No.
Inlet Diameter(mm) Outlet
Diameter(mm)
Max.
Diameter(mm)
50NZJF-MR 20.2-61 13-26.2 1300-1800 CV/CRV/ZVZ 4 135 50 225
75NZJF-MR 35.5-120 9.8-24 1000-1500 CV/CRV/ZVZ 4 180 75 260
100NZJF-MR 76.4-250 11.1-30 700-1100 CV/CRV/ZVZ 4 280 100 390
150NZJF-MR 210-530 17.4-40 600-800 CV/CRV/ZVZ 4 350 150 560
Solution
Industry Application