NZJH series is a high-head slurry pump that is mainly used in long-distance delivery of slurry-like tailings delivery. Because the rubber wet ends are limited to line speed, the wet parts of the NZJH series use metal material. The range of discharge size is 25-150mm; the flow rate range is 5-800m3/h and its max head is 100m. Therefore, the NZJH slurry pump is more efficient and with a higher head than other slurry pumps. Additionally, our slurry pumps are good replacements for Warman slurry pumps, Metso slurry pumps, Goulds slurry pumps, etc
NZJH series is a high-head slurry pump that is mainly used in long-distance delivery of slurry-like tailings delivery. Because the rubber wet ends are limited to line speed, the wet parts of NZJH series use metal material. The range of discharge size is 25-150mm; the flow rate range is 5-800m3/h and its max head is 100m. Therefore, the NZJH slurry pump is more efficient and with a higher head than other slurry pumps. Additionally, our slurry pumps are good replacements for Warman slurry pumps, Metso slurry pumps, Goulds slurry pumps, et
Design duty points refer to the rated point designated at the beginning of design of a slurry pump which is usually the highest efficiency point. Working range is increased by adjusting the speed of an NZJH high head slurry pump practically.
Model | FLOWRATE Q(m3/h) | HEAD H(m) | SPEED n(r/min) | Drive Arrangement | Blades No. |
Inlet Diameter(mm) | Outlet Diameter(mm) |
Max. Diameter(mm) |
25NZJH-MR | 10.3-26 | 80-93 | 2050-2200 | CRZ/ZVZ | 5 | 38 | 25 | 330 |
50NZJH-MR | 35.5-120 | 17.9-90 | 850-1450 | CRZ/ZVZ | 5 | 76 | 51 | 457 |
75NZJH-MR | 47.5-252 | 23.8-100 | 700-1400 | CRZ/ZVZ | 5 | 102 | 76 | 480 |
100NZJH-MR | 162-576 | 34-94 | 600-1000 | CRZ/ZVZ | 5 | 152 | 102 | 711 |
150NZJH-MR | 216-800 | 31-95 | 600-1000 | CRZ/ZVZ | 5 | 152 | 152 | 711 |