HomeTOMINE MineralParts&Accessories

Panels and Plates for Vibrating Screens

Vibrating screen is widely applied in industrial sectors as of non-ferrous, ferrous metals, coal and road construction. Panels and Plates for Vibrating Screens can separate mixed material of different kinds into different classes of particle sizes through the combination of single-deck or multi-deck screens, so as to meet the requirements of a certain ore dressing process.Wear occurs badly on the panels due to rubbings between materials and panels during the screening process. Compared with screens made of steel bars and with various shapes of openings, the rubber panels and plates produced by TOMINE Mining

Contact Download
Main Feature

TOMINE Screen Panels bears the following features:

1.Light in weight, reduced energy consumption;

2.High damping capacity resulting in reduced noise;

3.New structure, offering an easy assembling and disassembling;

4.Good resilience leading to a higher bounce frequency of materials and an increased screen efficiency;

5.Apertures of screen can be deformed within a certain limit, resulting in a reduced probability of aperture blockage by the material.

6.Screen panels and plates may be framed with different material in the pressure molding process, extending the service life;

7.Products with a service life between 6 and 24 months can be designed depending on the user’s requirements and the operating conditions;

8.Different apertures of screen can be designed per the user’s requirements.

(Note: in principle the diameter of sizing with rubber plate screening shall be greater than 6mm.

Technical Specification

The Specification and Size of Screen Panels:

Parameters of  a Typical Screen :

Vibrating screen mode: 3273 double-deck screen
Ore hardness: 12
Particle Size: Less than 30mm
Throughput: 700T/h
Screening efficiency: 92%

Comparison of performance:

1. Polyurethane lasts 2-3 months

2. TOMINE  rubber lasts 6-8 months

3. Longer service life

4. Less blocked apertures

Industry Application