Main Feature
English
TOMINE@TMT Polyurethane screen panels apply steel as the framework and special rubber as working surface. This kind of screen panels have many advantages and are suitable for heavy vibrating equipment in industries such as mine, metallurgy, carbonization, construction materials and coal dressing. Feature and Characteristics 1.Light in weight, reduced energy consumption; 2.High damping capacity resulting in reduced noise; 3.New structure, offering an easy assembling and disassembling; 4.Good resilience leading to a higher bounce frequency of materials and an increased screen efficiency; 5.Apertures of screen can be deformed within a certain limit, resulting in a reduced probability of aperture blockage by the material. 6.Screen panels and plates may be framed with different material in the pressure molding process, extending the service life;
| TP-01—TP-19 Rubber Physical Properties | ||||||||||||
| CODE | RUBBER NAME/PROJECT | Vulcanization temperature | extension | specific gravity | Hardness | Tensile Strength | Elongation | Tear Strength | Rebound rate | DIN Milling abrasion (cm3/40m)≤ | Applivation | |
| (g/cm3) | (Shore A) | (MPa)≥ | (%) | N/mm≥ | (%)≥ | Dry Grinding | wet | |||||
| TP-01 | 1# ball mill | 143 | 1.8 | 1.115 | 65±5 | 18 | 600 | 80 | 40 | 0.05 | 0.03 | All mill products |
| TP-02 | 3# ball mill ) | 143 | 1.8 | 1.115 | 65±5 | 18 | 600 | 80 | 40 | 0.05 | 0.03 | Ordinary lining |
| TP-02 | 3# ball mill | 143 | 1.12 | 65±5 | 16 | 600 | 75 | 40 | 0.05 | 0.03 | Flotation machine lining | |
| TP-03 | Zhjin Gold screen Mesh Rubber | 143 | 1.8 | 1.115 | 65±5 | 18 | 600 | 80 | 40 | 0.05 | 0.03 | Wear-resistant products with good strength requirements |
| TP-04 | Impact-resistant screen plate rubber | 143 | 1.7 | 1.15 | 70±5 | 22 | 500 | 85 | 35 | 0.2 | 0.05 | For impact-resistant screen plates |
| TP-05 | Cyclone Rubber | 130 | 2 | 1.01 | 45±5 | 25 | 600 | 50 | 65 | / | 0.02 | Wear-resistant products used in water environments |
| TP-06 | Wear-resistant Cyclone Rubber | 130 | 2.1 | 0.96 | 35±5 | 22 | 700 | 50 | 70 | / | 0.015 | For products that wear in wet environments such as cyclones and pumps |
| TP-07 | Oil-resistant cyclone rubber | 130 | 1.9 | 0.96 | 45±5 | 27 | 650 | 50 | 65 | / | 0.02 | There is a very small amount of oil in the slurry such as the front and rear guards of the pump |
| TP-08 | 85-degree dispersion cover rubber | 143 | 1.6 | 1.2 | 80±5 | 15 | 350 | 85 | 30 | 0.2 | 0.07 | For products that require a hardness of more than 80 degrees and poor mechanical and wear resistance |
| TP-09 | Low-temperature vulcanization wear-resistant lining rubber | 130 | 1.14 | 65±5 | 24 | 450 | 80 | 40 | 0.2 | 0.1 | Pipe lining | |
| TP-10 | Glue rubber | 143 | 1.04 | 55±5 | 23 | 500 | 65 | 65 | 0.2 | around 0.03 | Frame pasting and brushing | |
| TP-11 | Self-vulcanization rubber | 143 | 1.115 | 65±5 | 11 | 350 | 45 | 45 | 0.06 | around 0.03 | Anti-corrosion lining | |
| TP-12 | Rubber sheet rubber | 143 | 1.117 | 65±5 | 15 | 450 | 75 | 40 | 0.06 | 0.04 | Anti-corrosion lining | |
| TP-13 | Soft rubber sheet | 143 | 1.1 | 55±5 | 12 | 500 | 60 | 45 | 0.07 | 0.08 | nti-corrosion lining | |
| TP-14 | Electrolytic support | 150 | 1.56 | 75±5 | 11.24 | 248.5 | 25.31 | 25.3 | 0.206 | 0.234 | ||
| TP-15 | Flotation machine oil-resistant rubber | 143 | Oil-resistant | |||||||||
| TP-16 | Foreign rubber | 130 | 1.0593 | 50±5 | 26 | 550 | 120 | 55 | 0.0213 | or pumps | ||
| TP17 | Rubber sheet rubber | 143 | 1.09 | 60 | 17 | 550 | 70 | 45 | ||||
| TP18 | Pipeline rubber | 143 | 1.14 | 60±5 | 15 | 450 | 70 | 30 | ||||
| TP19 | Butadiene styrene | 143 | 1.115 | 65±5 | 18 | 550 | 80 | 35 | ||||
