HomeSolutionCoal Tailing with Multi-Deck Stacksizer
Coal Tailing with Multi-Deck Stacksizer
Solved Problem


A-Strictly implements the ISO9001 quality certification system and the relevant requirements issued by the State Technical Supervision  Bureau, and conducts strict inspections on the purchased raw and auxiliary materials, purchased parts, etc.; conducts self-inspection in accordance with the ISO9001 quality certification system requirements during the production process .

B-Strictly complies with the requirements of the ISO9001 quality certification, and meets the following standards and specifications Production of the whole machine:

C-Standards:According to “JB/T 11111-2010 High Frequency Mesh Vibrating Screen Welding process: According to “JB/Z286-87 Carbon Dioxide Gas Shielded Welding Process Regulations”, perform sandblasting process: According to “GB11373-1989 Thermal Spray Metal Parts Surface Pretreatment General Rules”,  perform spraying process: According to “GB/T 23446-2009 Spraying Poly Urea Waterproof Coating “ImplementationCertain special standards not specified in the above standards shall be implemented in accordance with the manufacturer’s standards. When the enterprise standards are inconsistent with the national standards (including the Ministry of Machinery Industry) standards and regulations, the higher requirements of the standards and regulations shall be implemented.

Flow Chart


20t/h (dry ore) stacked high-frequency screening;

the material is Coal  tailings, the maximum feed size is 0.5mm; the screening material needs to be recycled: 0-0.1mm (this part of the particles needs to be recycled, which accounts for about the total material 20-30% of the raw material does not contain mud; -0.1mm is classified and transported to the thickener and then finely processed with a shaking table or other gravity machine as well as flotation ; 0.1-0.5mm is classified and sent to the filter press for tailings to be drained; the specific gravity is less than -1

Manufacturing Process: Screen frame main engine: Q345R boiler container plate is used for the vibration part, and the whole steel plate of CNC plasma cutting machine is cut and bent, and tempered after welding to remove internal stress. The connection between the screen box and the funnel, and the screen box and the main vibrating beam adopts HUCK ring groove rivets and imported lock nuts to prevent the possibility of loosening of standard parts. The entire screen is sprayed on the outside, and the internal flow area is treated with natural wear-resistant rubber. There is no ore pulp and steel plate.

PS:Ti’s have Customizable process
Leave Message
Please Leave your Message Here! We will send detail technical info and quotation to you!