SP-100 × 100 jaw crusher is specially used for coarse crushing, medium crushing of various medium hardness ores in the laboratories of industrial departments such as geology, environmental protection, metallurgy, building materials, chemical industry, coal, power plants, universities and research institutes for rock or other materials. This machine has advanced structure, idealized design, long service life, fine and uniform discharge particle size, etc., and it is easy to disassemble and maintain, and has good dustproof effect. Practice has proved that the machine uses granite for open circuit crushing test many times, and its output particle size (when the transmission eccentric shaft is small eccentricity) is basically less than 1mm (with flat jaw plate), it can completely replace the middle crush and directly enter the disc crush Machine for fine crushing
This machine has advanced structure, idealized design, long service life, fine and uniform discharge particle size, etc., and it is easy to disassemble and maintain, and has good dustproof effect. Practice has proved that the machine uses granite for open circuit crushing test many times, and its output particle size (when the transmission eccentric shaft is small eccentricity) is basically less than 1mm (with flat jaw plate), it can completely replace the middle crush and directly enter the disc crush Machine for fine crushing
S.N. | ITEM | Unite | Figure | Remark | |
1 | Feeding Size | mm | 100 | ||
2 | Open Width | mm | 100 | ||
3 | Max Feeding Szie | mm | 80 | ||
4 | Output Size | mm | 0.2-20 | ||
5 | Ecentric Shaft Speed | r/min | 350 | ||
6 | Production Capacity | Kg/h | 25-800 | ||
7 | Motor | Modle | Y100L2-4 | ||
Power | Kw | 3 | |||
Rated Electrical | A | 6.8 | |||
8 | Dimension | mm | 1100×450×800 | L*W*H | |
9 | N.W. | Kg | 450 | Including Motors &Accessaries |