TPDG DRY MAGNETIC SEPARATOR , the magnetic system is made of neodymium magnet or ferrite magnet,with the open magnetic circuit design, the magnetic intensity can reach to 0.8T at the surface of roller. Its sorting roller is made of wear-resistant stainless steel; By the vibrating feeder,the minerals are distributed to the upper part of the roller, then the rotating roller will bring the magnetic material to otherside to separate with the non-magnetic material.
The dry magnetic separation equipment mainly used for the enrichment of lean ore, which is also called roughing. For example, 3-5% of the ore grade, by the separation of the magnetic separator can cast aside more than 70% of the waste rock or impurities, also can improve the iron grade to 20-40%. By this way,It will save the costs of the ball milling as abundant of lower grade materials are abandoned.The efficiency of ball mill can be improved by 5-8 times.
1. Dry mineral processing bring the advantage of no sewage and no consumption of water.which can save 0.6 million tons of water based on the TPDG-8180.
2. Take dynamic magnetic system design, which can largely improve the ore grade.
3. Uses a package of open magnetic system, the material does not wrap group, no clogging phenomenon, so the processing capacity of a single primary machine processing ore up to 50 tons or more, but also multi-machine side by side Parallel use, can be doubled to increase production.
4. Widely used in many industries:iron ore, river sand, tailings, steel slag, steel ash, sulfuric acid slag, abrasive, refractory, system board, rubber, food and many other industry needs.
The TP dry magnetic separation equipment mainly used for the enrichment of lean ore, which is also called roughing. For example, 3-5% of the ore grade, by the separation of the magnetic separator can cast aside more than 70% of the waste rock or impurities, also can improve the iron grade to 20-40%. By this way,It will save the costs of the ball milling as abundant of lower grade materials are abandoned.The efficiency of ball mill can be improved by 5-8 times higher
Model | Roller diameter/mm | Roller length/mm | Quantity of rolers | Magnetic field intensity (MT〉 | ProcBssing capacity (T/H) | Power(KW) |
TLDG-8180 | 800 | 1800 | 1 | 150-250 | 50-70 | 12 |
TLDG-8240 | 800 | 2400 | 1 | 150-250 | 80-100 | 12 |
TLDG-8180X2 | 800 | 1800 | 2 | 150-250 | 130-150 | 23 |
TLDG-8240 X 2 | 800 | 2400 | 2 | 150-250 | 180-200 | 23 |